聚丙烯储罐是一种不普通的储罐，肯定是要有安全防护措施，因为安全防护措施也是很有必要，对生产活动起到了关键作用。
1、工艺操作上严格执行安全操作规程，操作中球罐不超压，不超装。
2、球罐按期检验，发现缺陷及时消除。
3、严格执行罐区安全操作规程，加强罐区管理。
4、为防止事故发生后，高温火焰烧烤环境下的液态烃储罐内液态烃过热而迅速气化导致罐内超压、破裂泄露所引起的二次火灾，应尽快启动雨淋系统冷却事故罐和相邻罐，降低罐内温度。
在使用操作聚丙烯储罐的时候，不仅防护措施中有，它的阀门的壳体试验压力不得小于公称压力的1.5倍，试验时间不得小于5min，以壳体填料无渗漏为合格，密封试验以公称压力进行，以阀瓣密封面不漏为合格。
Polypropylene tank is a kind of unusual storage tank. It must have safety protection measures, because safety protection measures are also necessary and play a key role in production activities.
1. Strictly enforce the safety operation rules in process operation, and the spherical tank shall not be overpressure or overloading in operation.
2. Spherical tanks are inspected on time and defects are found and eliminated in time.
3. Strictly implement the safe operation rules of tank farm and strengthen the management of tank farm.
4. In order to prevent secondary fires caused by overheating and rapid gasification of liquid hydrocarbons in liquid hydrocarbon storage tanks under high temperature flame barbecue environment, the rain system should be started as soon as possible to cool the accident tanks and adjacent tanks, so as to reduce the temperature in tanks.
When using and operating polypropylene storage tank, not only protective measures, the shell test pressure of its valve shall not be less than 1.5 times of nominal pressure, the test time shall not be less than 5 minutes, the packing of the shell shall be qualified without leakage, the sealing test shall be conducted under nominal pressure, and the sealing surface of the valve shall be qualified without leakage.